IT CABINET - HOW TO INSTALL A POWER DISTRIBUTION UNIT (PDU)

PURPOSE

If you receive a Power Distribution Unit (PDU) for the IT Cabinet, follow the steps below to install it.

PROCESS

Open the covered switch. Turn oﬀ the PDU by switching the power oﬀ. The red light should not be on.

Disconnect the PDU cable from the Backup Battery UPS.

If there are any other cables, such as the modem, Meraki Firewall, switch, etc., plugged into the old PDU, unplug them.

Unmount the old PDU from the IT Cabinet by unscrewing the 4 screws.

Mount the new PDU to the IT Cabinet by screwing 4 screws.

Plug the cable from the UPS into the PDU and other cables.
Open the covered switch. Turn on the PDU by switching the power on. The red light should now be on.

Contact Mister IT (email MisterIT@mistercarwash.com or call 888-422-7343) to verify that everything is functioning correctly.